O Scale Shop Parts

  • RRSP-O-02

    Here is a Steam Boiler check out the detail. This could be used in Logging, Mining or any industry that needs some steam power. The boiler is a one piece casting with a metal tube for the stack. The boiler casting w/o the stack measures 2 3/4" high. All resin casting unpainted.

    Price:$10.00
  • RRSP-O-04

    Here is an other O scale project using the water tank from steam donkey. You get the resin cast tank and the wood skid for the bottom add some soft wire for a hose and paint it and you will create your own scene. All resin casting and comes unpainted. The casting measures 1 3/4" long by 1 1/8" wide and 1 3/8" high.

    Price:$8.00
  • RRSP-O-05

    Here is an other O scale project using the water tank from steam donkey. You get the resin cast tank and the steel supports for the bottom add some soft wire for a hose and paint it and you will create your own scene. All resin casting and comes unpainted. The casting measures 1 3/4" long by 1 1/8" wide and 1 3/8" high.

    Price:$8.00
  • RRSP-O-09

    Here is an O scale square water tank you can use anywhere. This little gem is a single piece casting. Measures 2" by 1 1/4" by 1 3/8" tall. Casting is unpainted and man is not included.


  • RRSP-O-10

    Here are two gas bottles with hose and torch molded into the casting. Tallest bottle measures 1 1/8" tall. Casting is unpainted.



    Price:$3.00
  • RRSP-O-13

    The tanks I have built before did so well that I made a larger tank with a bunch on rivets. This will be the tank for a new truck conversion in O scale. The guy does not come with the casting. All resin casting and comes unpainted. Casting measures 3" long by 2" wide by 2" tall this is including the base.

    Price:$13.00
  • RRSP-O-14

    Here the small tank that is on back of the model T truck. This little guy can go anywhere and the price is right. The casting measures 1 3/4" long by1 1/8" wide and 1" tall. All resin casting and comes unpainted.


    Price:$5.00
  • RRSP-O-16

    Here is a solvent stand. You see these around any shop. This is a two piece casting. These can go anywhere. The casting measures 1 1/4" long by 7/8" wide and 1" tall. All resin casting and comes unpainted.


    Price:$5.00
  • RRSP-O-20

    Here is an item that came off the 3D printer an old hit n miss engine. Some simple assembly is required. The castings of course are not painted. The figure is not included just for you to see the size of the item. The engine measures 1" by 1 1/4" by 1" tall.

    Price:$7.00
  • RRSP-O-21

    A service station gas pump island and the two gas pumps. Some simple assembly is required. The castings are not painted. The island measures 2 5/8" by 5/8" by 1/2" tall the pumps are 1/2" by 3/8" at the base and 1 3/4" tall. All the hoses and nozzles come with it plus some printed logos and pump face.

    Price:$12.00
  • RRSP-O-22

    I also wanted to make this if you want to only buy one gas pump. Some simple assembly is required. The castings of course are not painted. The pump measures 1/2" by 3/8" at the base and 1 3/4" tall. The hose and nozzle come with it plus some printed logos and pump face.

    Price:$5.00
  • RRSP-O-23

    I also wanted to make this if you want to only buy one gas pump. Some simple assembly is required. The castings of course are not painted. The pump measures 1/2" by 1/2" at the base and 2 1/2" tall. The hose and nozzle come with it plus some printed logos and pump face.

    Price:$5.00
  • RRSP-O-24

    I also wanted to make this if you want to only buy gas pump island. The oil cans and stand and the gas can are molded into the island. The casting of course is not painted. The island measures 2 5/8" by 5/8" by 1/2" tall. plus some printed logos for the oil cans.

    Price:$3.00
  • RRSP-O-25

    Here is the new O scale shop pipe rack. You get a set of boxes to add around the pipe rack or wherever you want. Some minor assembly is required to put the rack together. The casting is not painted and is made of resin. The rack measures 3 1/4" long and 1 3/4" tall and 7/8" tall.

    Price:$12.00
  • RRSP-O-26

    This is a large Electric motor. In the pictures you see the completed motor and the parts you receive for the motor build. Now you can get some modern power into your shops and mines. The casting is not painted and is made of resin. The motor measures 1" by 3/4" and is 1 1/8" tall. Minor assembly required.

    Price:$8.00
  • RRSP-O-27

    Here we have a new dual steam engine. This is a kit that requires some minor assembly of 5 parts. The base and pulley and flywheel are cast in resin and the two steam engines are 3D printed to make sure the fine detail comes to life. Minor assembly required.


    Price:$12.00
  • RRSP-O-32

    These are the old coke machines that I remember as a kid. These had only glass bottles in them, no cans. The old stand up model that you pulled the bottle out of the door and the lid model that only had cold water in the bottom. You get both models.

    Price:$5.00
  • RRSP-O-35

    Here you have 3 electric motors for your shop or any business. Ed is not included he is just there to show you some scale.



    Price:$6.00