Craftsman Kits and castings in HO and
O Scale
C
www.rustyrail.com Email: rickanmary@rustyrail.com
New O Scale
Stuff
Check out the new
page called the Hot Sheet. This will have items like un built kits,
built kits, brass trains and other goodies I will sell or trade
for. You can see the link
to the left of your screen or clink on the link.
Clink here to go to the page.
New O
scale castings - Have
some new castings. And many more on the way.
RRSP-O-09 -
Here is an O scale square water tank you can use anywhere. This little gem
is a
single piece casting. Measures 2" by 11/4" by 1 3/8" tall.
Click on picture for pricing.
.JPG) .JPG)
 .JPG)
RRS-O-07 -
Here is a new building that can be used as an a store, mining office,
logging office,
barber shop and the list goes on. This building is hollow and does
require some assemble. The
building is unpainted. You will receive a barrel, a trash can and a wood pile as extras. Measures
5" by 2 1/2" by 4" tall.
Click on picture for pricing.
 .JPG)
.JPG) 
.JPG) .JPG)
.JPG) .JPG)
RRSP-O-08 -
Here is an O scale dock crane you can use anywhere. This little gem will
look great
on a loading dock.
And check it out with 'Slim Jim'
on deck.
The crane is cast in 4 pieces and
does require some assembly.
Click on picture for pricing.
.JPG) .JPG)
.JPG) 
RRPR-O-02
-
Here is the next O
scale figure called 'Slim Jim'. This guy can fit in anywhere on
your layout.
Click on picture for pricing.
RRCB-O-05 - Here
is a parts bin for your O Scale shop. I've in my younger days worked
in some shops that had parts bins like these on the shop floor. Just check out the
detail
of all the parts in each bin. Hope you enjoy this one.
Measures 2 1/4" tall by 1 3/8"
wide
and 1/4" thick. All resin casting and comes unpainted.
Click on picture for pricing.
 .JPG)
RRCB-O-06 -
Here
are some old shop shelves. You would see these in any old machine shop.
Just check out the detail on the shelves. Just hang them on the
wall after a little paint and good
to go. You get get the two shelve units you see in the pictures.
Shelve 1 measures 2 3/4" long
by 1" tall and 1/4" thick. Shelve 2 measures 3 1/8" long and 1"
tall and 1/4 thick. All
resin casting
and comes unpainted.
Click on picture for pricing.
.JPG)
.JPG) .JPG)
RRMS-O-21 - Here
is a 1953 Ford pickup for the O scale group. This is one of my favorite
old cars. I have been asked to make later car models so here you are. Check
out the rust
on that hood and the hole in the windshield. Hope you enjoy this one. The casting measures
4
1/2" long by 4" wide and 1 3/4" tall.
Click on picture for pricing.
 .JPG)
RRMA-O-01 -
Next like I said last month working on some O scale boats. And the first one
is a
small rowboat. As you can see you get a set of oars. And look how Rusty
Rails figure fits right
in the boat. This is the first offering of O scale boats.
The casting measures 4" long by 1 3/4"
wide and 3/8" tall. Figure is not included.
Click on picture for pricing.
.JPG) .JPG)
.JPG)
RRBS-O-09 -
Also I'm offering another barrel set that is just closed barrels. It was
suggested that
most barrels in displays are the closed type.
Click on picture for pricing.
 .JPG)
RRMS-O-20 -
Here is something special an old rail truck.
You can add this to any engine house
scene. This guy can set on any siding or can
be setting as junk. I plan to make flat car load of this
unit junked.
The casting measures 5
1/2" long by 2" wide and 2 1/2" tall.
Click on picture for pricing.
 .JPG)
.JPG) .JPG)
The hood is
removable here are some shots with the hood for a different look.
.JPG) 
Now here is one that I made a rust bucket that is not working. So
you can see a lot of possibilities
with this one.
 .JPG)
RRMS-O-19 -
This casting is a display
track to show off your latest engine or rolling stock. The casting
measures 6" long by 3" wide and 1" tall.
Click on picture for pricing.
 .JPG)
.JPG) .JPG)
RRJP-O-08 -
This casting is an
old abandoned steam two drum winch. This piece of equipment has
been left to rust away in the wildness. I love coming up on
abandoned equipment like this. You just
wish you were the first one to find it. As you can see one of the
drums is missing and all kinds of
junk is laying around. The casting measures 41/2" long by 4" wide and 1" tall.
Click on picture for pricing.
.JPG) .JPG)
.JPG) .JPG)
.JPG) .JPG)
RRSP-O-07 -
The casting this month is a
old portable air compressor. You can purchase the air
compressor as a separate item as shown below. This guy can be
used at a mine or a street repair
using a jack hammer. Check out the engine detail below and you can
position the pull bar any way
you want. It does require some assembly. Maybe a junk pile on this
one soon. The casting measures
2 1/2" long by1 1/4" wide and 1 3/8" tall.
Click on picture for pricing.
 .JPG)
.JPG) .JPG)
.JPG) 
RRSL-O-01 - Resin logs that are
separate. You get four different logs. Check out the samples below.
You can stack them like in the example.
Click on picture for pricing.
.JPG)
RRMS-O-18 - This O
scale casting is a house ruin. Who has not come on one of these when they
were out exploring. All the is left is the basic foundation and some for
the wood floor and chimney.
Check out some of the junk left like old tin cans with the lid still on
them and the old stool that is half
gone. Anyway this could be an interesting addition to your layout. All resin casting and comes
unpainted. The casting measures
5" long by 3 1/4"
wide and 3 1/4" high.
Click on
picture for pricing.
.JPG) .JPG)
.JPG) .JPG)
.JPG) .JPG)
RRBS-O-08 - Here is
an extra detail I made cable reels with the cable on them. They could go just
about any where. You get three different size reels. All resin casting and
comes unpainted.
Click on
picture for pricing.
.JPG) .JPG)
RRMS-O-17 -
This O scale casting is an old boxcar given a new life as a warehouse, office,
freight house. You get the idea you can make it what works for you. Of course the normal
accumulated junk around the casting. The interior is open so you can add what you want
inside. So have some fun with this one.
All resin casting and comes unpainted. The
casting measures
4 1/2" long by 3"
wide and 1 1/2" high.
Click on picture
for pricing.
.JPG) .JPG)
.JPG) .JPG)
.JPG) .JPG)
RRMS-O-16 - This O
scale casting is an old tractor put out to pasture after many years
of hard labor. This casting will look good anywhere behind the barn or left in a
junk
yard. Just check out the junk littering the area. I see a lot of these classics out in the
farm
land around me.
This will make a unique scene for your railroad. All resin casting
and comes unpainted. The casting measures
4 1/2" long by 3" wide and 1 1/2" high.
Click on picture for pricing.
.JPG) .JPG)
.JPG) .JPG)
RRSP-O-06 - The
steam winch will be offered assembled and primed as in the pictures
below. Just think of all the different things you can make from
this. Even if it is sitting
behind the shop rusting away. All resin casting and comes assembled
and primed.
The casting measures 3 1/8" long by 2 1/4" wide and 1" high.
Click on picture
for pricing.
.JPG) .JPG)
 .JPG)
RRMS-O-15 -
This is an old Packard truck
that has been abandoned. This would fit
behind and old mine or logging site or behind one of your business.
Or if you want
to make an auto junk yard we have several of these castings. I give
you a steering
wheel to add and you can use some wire to make the gear shifters. This will make
a unique scene for your railroad. All resin casting and comes unpainted. The casting
measures 7" long by 3"
wide and 1 1/2" high.
Click on picture for pricing.
.JPG)
.JPG) 
.JPG)
RRLE-O-01 -
This is a stand
alone steam donkey. The casting is shipped in two
pieces the
base and the boiler. This will make a unique scene for your railroad. All resin casting and
comes unpainted. The casting measures 6 1/2" long by 2 1/8"
wide and 4" high.
Click on picture for pricing.
.JPG)
.JPG) .JPG)
RRMS-O-14 -
This is the largest casting I
have made to date. And takes about three
times the resin one of the other large castings take. The casting
is shipped in two
pieces the base and the boiler. This will make a unique scene for
your railroad. All
resin casting and comes unpainted. The casting measures 7 1/2" long by
4 1/2" wide
and 4 1/2" high. Click on picture for pricing.
 
 

RRSP-O-04
- Here is an other
O scale project using the water tank from steam donkey. You
get the resin cast tank then build your own wood skid for the bottom add
some soft wire
for a hose and paint it and you will create your own scene. Check out the
pictures below.
All resin casting and comes unpainted. The casting measures
1 3/4" long by
1 1/8" wide
and 1 3/8" high. Click on picture for pricing.
 .JPG)
.JPG) .JPG)
RRS-O-06 -
I always wanted to make
a shack in this style with the porch in front.
I added a bunch of detail to the outside walls (no interior in this
one). The pictures
below shows the detail molded into the walls. You will even see the
shack bath tub
hanging on the back of the shack. This comes with a base the four
interlocking walls
and the the roofs and of course a stone chimney on the side.
I think I will throw in the
woodpile and the chopping block in nice addition. All resin casting and comes unpainted.
the cabin measures 5" by 3 1/2" by 2 3/4" high. Click on picture for pricing.
 
 
 
 
 
RRMS-O-13 - Here I have
created some track bumpers for the ON30 crowd. These match
up to the end of your existing track. You see the two styles below.
This includes one of
each for two castings. Both castings are about 3 1/2" by
2". All resin casting and comes
unpainted. Click on picture for pricing.
 
 
RRWB-O-01 -
Classic old workbench. Length is
2 1/4" and 1 7/8" tall. All resin casting.


RRMS-O-12
- Here is a Cat under
repair or in the bone yard you decide. This casting
would look in a logging, mining or even farming scene. Check
out the tarp molded
into the casting and the head is removed showing the exposed
cylinders. The figure
is not included and just to compare sizes. This casting is 4
3/4" by 4 1/2" and 2 1/4"
high. All resin casting and comes unpainted.
Click on picture for pricing.
.JPG) .JPG)
.JPG) .JPG)

RRMS-O-11
- Here I go again
another of junk car. This is a 1932 Coupe with a cloth top
insert that has long rotten away and the interior is gutted. Check
out the interior
shot.
The flathead engine is still around now ( must have been a blown motor or
that would be
gone by now) but that's about all. Added an old tree stump. This
casting is
5" by 4" and 1 1/4" high. All resin casting and comes unpainted.
Click on picture for pricing.
 
 
RRSP-O-02 -
Here is a Steam Boiler check out
the detail. This could be used in Logging,
Mining or any
industry that needs some steam power. The boiler is a one piece
casting with
a metal tube for the stack.
The boiler casting w/o the stack measures
2 3/4" high. The figure is not included just used to compare
sizes. All resin casting
unpainted.
Yes that is the new O scale
Garage in the pictures below.
Click
on picture for pricing.

.JPG)

RRSP-O-03 -
Here is a Old Shop Engine check out the detail. This could be used in
Logging,
Mining or any
industry that needs some engine power. The engine is a three piece
casting the
engine casting and the two fly wheels. The assembled engine casting
measures 7/8" high.
The figure is not included just used to compare
sizes. All resin
casting
unpainted.
Click
on picture for pricing.
 
RRJP-O-14
-
Here is a junk pile for a
logging or mining outfit. Check out the detail on this
one. This casting is
4 1/2" by 4 1/2". All resin casting and comes unpainted.
Click
on picture for pricing.



RRBS-O-07 -
Here is a bunch of woodpiles. You get 2 split logs piles and one pile of
cut logs and a
splitting log with axe in it.
The figure is not included just used to
compare
sizes. All resin castings
unpainted.
Click
on picture for pricing.

RRTC-O-04 -
Here is our latest truck conversion to
turn a 1934 Ford pickup into a home made
flatbed. You
can supply your our truck or purchase one from us. The conversion kit
includes a
new grill, the correct spoke wheels and tires Including spare for the wheel
well and wood
bed. We will even throw in the box of junk for the bed you see in the
pictures
below. With a little work you can turn a regular die cast truck into an
eye catching
truck for your layout. Conversion instructions included. All resin
castings
unpainted.
Click
on picture for pricing.
Turn This
Into This

 

RRMS-O-10 - Here is a
loading dock you can use to load freight
on to your cars. The dock
measures 5"
long by 2" wide and 3/4" tall. This is a one piece casting. All resin castings
unpainted.
Click
on picture for pricing.

Some of the O Scale castings from
prior newsletters
RRS-O-05
-
Here is our new outside shed.
This could fit anywhere logging camp, mine,
or any industrial site. Check out the detail built into this scene.
I set this up as a small
engine repair shop. You can even see the openings between the
boards on the side
of the shed. As you can see from the photos below this casting is
full of detail and
could fit any where on your layout. This casting is 6" by
4" and 2 1/4" high. All resin
casting and comes unpainted.
The figure you see in the
pictures IS NOT
INCLUDED,
just for comparison. Click on picture for pricing.
Here are some pictures of the shed with the removable roof on.
 
Here are some pictures with the removable
roof removed.
 
 
 
RRJP-O-13
-
Here is a new small junkpile.
This stack of oil drums is without a base so it can
go anywhere even a warehouse wooden floor. This casting is
5" by 3" and 2 3/4" high. All
resin casting and comes unpainted.
Click on picture for pricing.
 
RROH-O-01
-
I have been going back and
reworking some of my original castings. Here is the
first outhouse This casting is
5" by 3" and 2 3/4" high. All resin casting and comes
unpainted. Figure not included.
Click on picture for pricing.

RRMS-O-09
-
Well here is a
casting that will get you imagination going where to
put it? Behind the engine house, by the logging camp or by that old mine. This
will be a study in rust and how weathered can I make this thing!! Mine is going
in the bottom of
that canyon below my trestle on my layout. The cab was cut
down to show the wood falling apart. You may want to remove the resin cab
and make a real wood cab or
add more detail its up to you. The cost on this one
is not cheap since the mold will not last long
and will have to be replaced a lot.
But this will make a scene on your layout that will make viewers go
WOW!!! This
casting is
5" by 3" and 2 3/4" high. All resin casting and comes unpainted.
Click on picture
for pricing.




RRMS-O-08
- Here I go again
another of junk car. This was a Ford with a cloth top
insert that has long rotten away and the interior is gutted. Check
out the interior
shot.
The flathead engine is still around now ( must have been a blown motor or
that would be
gone by now) but that's about all. This casting is
5" by 3" and
1 1/2" high. All resin casting and comes unpainted.
Click on picture for pricing.




Plus a lot of new
stuff for O scale coming. So stay tuned.
|