HO Scale Castings

  New HO Scale Stuff

  RRMS-H-13 - We also have a new HO scale scene. This casting is 'What Happened' steam
    crane in the mud. Check out the pictures below all the stumps are molded in to the casting
    base. This could even be a scene where these two fellows find this in a clearing in the
    woods. Then wonder how it happen.   The casting measures 5 1/2" by 3 1/4" and 3"  tall.
   This casting is unpainted and requires some minor assembly.

   Click on picture for pricing. 
 

 RRTK-H-04 - Here is a HO log truck molded in one piece. All you have to do is paint it. This
    could be a cheap  way to get a fleet log log trucks for your layout. Going to make some log
    trucks in the future that are 1930's models. The casting measures 3" by 1" and 1 " tall.
    This casting is unpainted.

   Click on picture for pricing. 

 RRMS-H-14 - Each month I try and make an item that is inexpensive in these trying times.
    Here is a HO scale loading dock for your siding. Check out the board detail. You could
    even put two of these loading docks together end to end and get a larger loading dock.
    The casting measures 4" by 1 3/4" and 1/2"  tall.  This casting is unpainted.

   Click on picture for pricing. 
 

 RRJP-H-28 - This casting is Joe's cheap fuels. This is one of those  business the EPA if it
   existed would be on the owner like a dog on a pant leg. Just check out the old tank half
   buried in the ground to hold the good stuff you know as Texas T. The next item below
   would go good with this junk pile. The casting measures 4 1/2" by 3" and 1"  tall. This
   casting is unpainted.

   Click on picture for pricing. 
 

 RRTK-H-03 - Here is a HO tank truck molded in one piece. All you have to do is paint it. This
    could work to transfer fuel or as a water truck. And would work great with the Joe's cheap
    fuels above. The casting measures 2 1/4" by 1" and 1 " tall. This casting is unpainted.

   Click on picture for pricing. 
 

 RRJP-H-27 - This is a casting of an old porter engine that will look great setting behind your
   engine house or on a mining or logging scene. The casting measures 4 1/2" by 3" and 1 1/2"
   tall and the base is about 4" by 4". This casting is unpainted.

   Click on picture for pricing. 

 RRMS-H-12 - Here is a fun little piece of a 1935 Ford railcar.  The wheels are set for HOn3
   scale. This casting measures 2 1/8" long by 3/4" wide and3/4" tall.  This is an unpainted
   resin casting. 

   Click on picture for pricing. 

   RRMS-H-12 - For you HO scale types this month I have something special a railcar. Check
   out the two tycoons checking to see what they need to do next. These were common on
   some railroads. All resin casting and comes unpainted. The casting measures  4" long by
   1 1/2" wide  and  1 1/4"  high.

   Click on picture for pricing. 

                                                    

RRJP-H-26- We also have a new HO scale junk pile. This casting is a diesel unit left to turn to
    rust. This would look good in the back of the engine house etc. May build more of these that
    can be combined to make a bone yard.   All resin casting and comes unpainted. The casting
    measures  5 1/2" long by 3" wide  and  2"  high.

   Click on picture for pricing. 

RRMA-H-03 - Here is a small fishing trawler that is a water line model. You can see all the detail
 the large cargo hold and the winch etc. This one would look good with a lumber load or add fish
 nets. The mast is also resin.  All resin casting and comes unpainted. The casting measures  6 1/2" long by 1 3/4" wide  and  6"  high.                                                                               

Click on picture for pricing. 

RRMA-H-04 - Here is the water line model of RRMA-H-01 above.  You also get two fish traps.  All resin casting and comes unpainted. The casting measures  4 1/4" long by 1 3/4" wide  and 2 " tall.

Click on picture for pricing. 

  Castings from previous newsletters 

   RRMA-H-01 - Here is our first fishing boat model. This guy has a lot of character. It is a
   two piece casting the hull cabin etc is one part and the roof comes as a single casting.
   You can even see the rope molded into the front deck. This casting is a full hull so you
   can do what you want the boat out of water or you can sand the hull for a water line model.
   You also get two fish traps.  All resin casting and comes unpainted. The casting measures
   4 1/4" long by 1 3/4" wide  and  2"  high.         

     Click on picture for pricing. 



   

    RRMA-H-02 - Now this one was fun to create. I call this one 'On the Rocks'. You can see
   this boat has hit the breakwater. Would this look good in your harbor scene. You could add
   broken windows and fishing nets etc.  All resin casting and comes unpainted. The casting
   measures  5" long by 3" wide  and  2"  high.         

     Click on picture for pricing. 
 

   RRSL-H-01 - Resin logs that are separate. You get four different logs. Check out the samples below.
    You can stack them like in the example.

    Click on picture for pricing. 

       

    RRJP-H-25 - Here  HO casting of a logging junk pile. All sorts of goodies like a steam
    winch and the boiler with the stack removed to show the boiler tubes. Other misc junk
    laying around. This would go good around a saw mill or logging repair shed. All resin
    casting and comes unpainted. The casting measures 5" long by 3" wide and 1 1/2"  high.

     Click on picture for pricing. 





   RRLE-H-03 - Also in HO here is a tank on skids that can be used anywhere in a logging
   operation, industrial or a portable fueling station. Notice the hose hooked to the side of
   the tank. The figure does not come with the tank it is just to help you see the tank size.

   Click on picture for pricing. 



   
  RRJP-H-24 -Here is a truck bone yard. You can make a junk yard on your layout using this
    casting and several others we produce. Will be a real eye catcher. Just image the items
    you could add. It would need a wooden fence surrounding the junk yard. Well you get the
    idea. Just check out the detail and two guys standing around wondering where to start.
    All resin casting and comes unpainted. The casting measures 7" long by 3 1/2" wide and 
    1 1/2"  high.  
   
    Click on picture for pricing. 

   RRLE-H-02 - This is the HO steam Winch and the boiler so you can purchase them separate
    from the Donkey engine castings. We will throw in a wood pile for the boiler. So you can
    make your own skid or come up with a stand alone unit to move cargo from ships to trucks,
    or logs at a mill you get the idea. All resin casting and comes unpainted. The casting
    measures 2" long by 3/4" wide and  2"  high.  

   Click on picture for pricing. 

   RRMS-H-10 -This casting is an old gas powered shovel left to rot.  This guy has had
   his cab stripped off and is ready for the junkman, The casting comes in four parts
   and does require some assembly. This will make a great addition to an abandoned
   mining, logging or industrial site. All resin casting and comes unpainted. The casting
   measures 4 1/4" long by 3" wide and  3 1/4"  high.  
  
   Click on picture for pricing. 
 
   
   

    RRMS-H-09 -This casting is a Logging Steam Donkey.  This is a abandoned steam
    donkey in the woods left behind. The casting is shipped in 4 pieces the base and the
    drums and the boiler. This will make a unique scene for your railroad. All resin casting
    and comes unpainted.  The casting measures 5 1/4" long by 3" wide and  3"  high.
      Click on picture for pricing. 

     RRLE-H-01 - This casting is a Two Drum Logging Steam Donkey. This is a stand alone
     unit that you can place anywhere.  The casting is shipped in 4 pieces the base and the
     drums and the boiler. This will make a unique scene for your railroad.  All resin casting
     and comes unpainted.  The  casting measures 3 1/2" long by 1 3/8" wide and  2 1/2"  high.

     Click on picture for pricing. 

    RRMS-H-08 -This a Jensen Oil Pump.  You see a lot of these around my area since we a lot
    of Oil Pumping takes place in fields about 50 miles from Fresno. Check out the Wild cater
    checking out his rig. This will go great with the Oil Field Tank we made a few months ago.
   The casting measures 4" long  by 3" wide by 2" tall.

    Click on picture for pricing.

  RRJP-H-23 -The new casting this month in HO is a tractor bone yard.  You see a lot of
    these around my area since we a lot of farming takes place in Fresno. When you see
    these bone yards you always see people standing around thinking where do I start. I
    tried to make the scene complete with that person pulling up in their car and starting
    their  search. The casting measures 6 1/2" by 3".

   Click on picture for pricing.

  
  
  

  RRMS-H-07 -Here is a little scene catcher a oil storage tank.  Lots of junk laying around.  Even
  the roof is caving in. Lots of pipes and values. The casting measure 3 1/4" by 2 3/4" by 2 1/2".

    Click on picture for pricing.

 RRMS-H-06 -This scene could be used anywhere logging, mining, oil field or just junk on a farm.
   This is a Cat under repair. Lots of junk laying around.  The casting measure 3 1/4" by 2 1/2" by
   1 1/2".

        Click on picture for pricing.

   RRJP-H-22 - This is a casting of an old engine boneyard. That would look great behind an engine
          house, logging railroad or mining railroad.  The casting  measures 5 1/2" by 4" .  All resin
          unpainted casting.       

      Click on picture for pricing.

     RRS-H-08 - Here is the latest HO offering. This cabin will fit just about anywhere.  You can see it as a
   trappers cabin, loggers cabin, hobo shack  from the depression era. Molded a lot of detail into this
   casting. The roof is removable and check out the inside. Check out the photos below. The roof is in
   two pieces that you glue together. This would also go good with your HO still scene. This casting  will
   have a small footprint that measures 4 1/2" by 3" and 2 " tall.  All resin casting.

 Click on picture for pricing.                                                   

   RRS-H-07 - Here is the latest HO offering. This small shack will fit just about anywhere.
   you can see it as a miners shack, hobo shack, oil field shack or part or a freedom village
   from the depression era. Molded a lot of detail into this casting. Check out the photos
   below. This is a one piece casting with a plastic piece for the smokestack. This casting
   will have a small footprint that measures 3 1/2" by 4" and 1 3/8 " tall.  All resin casting.

   Click on picture for pricing.

  
  
  

   RRS-H-05 - Here is a building that is about to go over. If you have ever been to
   an old town or ghost town you have seen one of these. Junk piles and and old
   model T surround this building. Just check out the wall detail patches and all.
   This is a two piece casting, Measures 4" by 4" and 2 1/2 " tall. All resin casting.

   Click on picture for pricing.

 
    

   RRJP-H-21 - This is a casting of an old auto junk yard # 1. I will make several of
   these so you can create a auto junk yard. Check out the 35 Ford the canvas roof
   is rotten away and the inside is gutted,  The casting  measures 6" by 2 3/4" and
   1" tall.  All resin unpainted casting.       
   
   Click on picture for pricing.

 
 
 

 
  
    RRJP-H-20 - This is a casting of an old derelict shay engine. That would look
   great behind an engine house, logging railroad or mining railroad.  The casting
   measures 6 1/2" by 2 3/4" and 2" tall.  All resin unpainted casting.          
   Click on picture for pricing.

   RRMS-H-05 -Here is another great junk car that can be placed behind an old building.
   The auto has a wood bed. Lots of junk laying around. If you only want the car do like
   I do some times and cut the rest of the casting out.  The casting measure 3 1/2" by
   2 3/4" by 1". Click on picture for pricing.

   RRK-H-03 - Here is a our latest HO kit, the single car garage w/interior. I can
   remember these garages when I was a kid full of old junk and cob webs. I
   added all the interior for you all you have to do is paint it and some minor
   assembly. The base has some great detail as you can see in the pictures
   below. All you need to to do is add your favorite car and you are good to go.
   The kit is designed to be a single car garage behind a house that lets out into
   the alley behind the house. You can see the trash cans in the alley. If that does
   not work for your knock down the fences and have a stand alone garage. A lot
   of different things you can do with this one. The car in pictures below is not included.
   Will make another home garage with peaked roof in the future. The base measures
   4" by 3 1/2". The kit does require some minor assembly and painting.
   Click on picture for pricing.