HO Scale Buildings

  • RRS-H-01

    Here is a new HO lean too shack. These were quite common during the 1930's. They would be built against a existing building. Used as storage or living quarters. Added a lot of additional detail to the outside. The casting is not painted. The building measures 1 3/4" by 1" by 1 1/4" tall.

    Price:$7.00
  • RRS-H-02

    Here is our new HO scale lumber camp cook house. This kit goes along with our lumber camp lumberjacks cabins on skids. This is a hollow kit that requires some minor assembly. This was the heart of a lumber camp. Simple: no food, no work. As you can see it comes with its own base and has a removable roof.

    Price:$25.00
  • RRK-H-03

    Here is a reissue of the Home Garage kit. I created a smaller base and redid all the molds. I added all the interior for you all you have to do is paint it and some minor assembly. The kit is designed to be a single car garage behind a house that lets out into the alley behind the house. The base measures 3 3/4" by 2 3/4".

    Price:$20.00
  • RRS-H-04

    Here we have a warehouse building for the HO crowd. This is a hollow building. You get four sides to assemble and the two roof pieces. Check out the detail on the building walls, each wall has different detail.


    Price:$20.00
  • RRS-H-05

    Here is a building that is about to go over. If you have ever been to an old town or ghost town you have seen one of these. Junk piles and and old model T surround this building. Just check out the wall detail patches and all. Measures 4" by 4" and 2 1/2" tall. All resin castings.

    Price:$15.00
  • RRS-H-06

    Here is a great example of company housing for workers. Check out the detail built into the base. Also you can use the base or use it w/o the base. Check out the coffee cup on the stairs and tin roof. the base measure 3 1/2" by 2 1/2". The building measures 2 1/4" by 1 1/2" by 1 1/4" tall. Castings are sold unpainted

    Price:$11.00
  • RRS-H-07

    HO open shed w/interior.Just check out all the small details on the work bench and walls. Then check out the junks piles and stuff molded outside the building. In the pictures I have added a base and some scenery to enhance the pictures.

    Price:$17.00
  • RRS-H-08

    This cabin will fit just about anywhere. You can see it as a trappers cabin, loggers cabin, hobo shack from the depression era. Molded a lot of detail into this casting. The roof is removable. This casting will have a small footprint that measures 2 1/4" by 2" and 2" tall. All resin casting.

    Price:$7.00
  • RRS-H-09

    Here is Hobo Shack #1. This casting will have a small footprint that measures 2" long by 1 1/2" wide and 1" tall. As you can see a lot of detail in this little guy. Start your own hobo camp or it could be a loggers or miners shack. All resin casting and comes unpainted.

    Price:$8.00
  • RRS-H-10

    Here is Hobo Shack #2. This casting will have a small footprint that measures 1 3/4" long by 1 3/4" wide and 1" tall. As you can see a lot of detail in this little guy. Start your own hobo camp or it could be a loggers or miners shack. All resin casting and comes unpainted.

    Price:$8.00
  • RRS-H-11

    TNow here is a new shack casting for the HO group. This building is just full of detail. A one piece casting that you just paint and place. Check out the fiddler sitting on the side of the building. The casting measures 3 1/2" by 2" by 1 1/2" tall. All resin casting and comes unpainted.

    Price:$12.00
  • RRS-H-12

    Here is a small town newspaper building. This will work in the old west or a 1930's mining town, your choice. Check out the siding rusted tin and old rotten wood. And of course a news hound reading the latest edition. The casting measures 2" by 1 1/4" by 2 1/4" tall. All resin casting and comes unpainted.

    Price:$12.00
  • RRS-H-13

    Here we have a home garage that would be great behind any house. The front doors are open and a 1940 ford is sticking out. Nice detail and a small foot print. All resin casting and comes unpainted.


    Price:$12.00
  • RRS-H-14

    This is a covered old time gas station that will look good on any part of your layout in the city or out in the country. The gas station comes with gravity fed pumps or newer gas pumps. This make a great little scene in a small space for little money. All resin casting and comes unpainted.

    Price:$20.00
  • RRS-H-15

    This is a small train depot that will fit any small town setting. You also get three passengers and their luggage. The casting measures 5 by 2 1/2" by 2 1/2" tall. Requires some minir assembly. All resin casting and comes unpainted.

    Price:$22.00
  • RRS-H-16

    Here is a we have a short line water tower for those thirsty engines. This make a great little scene in a small space for little money. Requires some minor assembly. Castings are resin and come unpainted.


    Price:$18.00
  • RRS-H-17

    This building would be great for a field office for a mine or lumber mill. Check out the detail on this one. The casting measures 3" by 1 5/8" by 2" tall. All resin casting and comes unpainted.


    Price:$12.00
  • RRS-H-18

    Here is a new hobo shack or Hover Ville shack. Check out the detail all round from the ladder hang on side to the woodpile. This one has a tar paper roof. If you have purchased any of other hobo shacks this one will fit right in. Measures 1 3/4" long by 1 1/2" wide by 1 1/2" tall. All resin casting and comes unpainted.

    Price:$10.00
  • RRS-H-19

    This is a garage made with tin siding and with a full interior. The roof will lift off to view the interior. Also you can leave the front wall off the building. Some minor assembly with gluing the walls together. The base measures 4 1/4" by 4". The shop measures 3 1/8" by 3" and 2" tall. All resin casting and comes unpainted.

    Price:$30.00
  • RRS-H-26

    Here is the Last Chance Garage. The old gas gravity pumps are molded on a island that you can place anywhere. I added material to make a sign and some additional posters for the walls. The building is a one piece resin casting. This casting comes unpainted and measures 3 1/2" by 2 7/8" and 2" tall.

    Price:$20.00
  • RRS-H-27

    Here is another building that can be a small short line freight house or a tool shed. Comes as a two piece casting with the dock and building separate. The casting is sold unpainted and the dock measures 4" long by 2" wide and 3/8" tall. The building measures 3 1/4" long by 1 3/8" wide by 1 1/2" tall.

    Price:$18.00
  • RRS-H-29

    Here are two old sheds that can be used just about anywhere. Just check out all the detail around the buildings. The buildings have a small footprint. All resin castings and come unpainted. Shed #1 2 3/8" by 1" by 1 3/4" tall. Shed #2 2" by 1" by 1" tall.

    Price:$14.00
  • RRS-H-30

    Here we have a building that could be used in many places, like to hold you RR inspection cars or as a storage or tool shed for any industry. The casting of course are not painted. The building measures 3 3/4" by 1 1/2" by 1 3/4" tall. Casting is unpainted. Base and scenery are just to show you how it could look.

    Price:$16.00
  • RRS-H-31

    Here is a cool little shop that has a small footprint and a interior with a removable roof. You also get a oil drum junk pile for the outside of the shop. You receive a two piece shingle roof for the shop. Some minor assembly is required and of course the castings come unpainted. The shop measures 2 1/2" long by 2" wide by 1 1/2" tall.

    Price:$20.00
  • RRS-H-32

    Logging Camp cabin with skids. The cabin will also come with 4 small castings you see in the pictures that you can place outside the cabin. The roof is cast separate so some minor assembly is required. The castings come unpainted. The cabin measures 3 1/8" long by 1 1/2" wide by 2" tall.

    Price:$12.00
  • RRS-H-33

    Small repair shed could be for tractors or cars. The kit comes with the four walls with interior bracing and some items like workbenches molded into the walls. It has a base with a removable roof and positional doors for the front of the shed. Castings are sold unpainted. Simple assembly is required.

    Price:$25.00